| Search Results: ASUS/ASmobile Rampage II Extreme Motherboard |
| Part Number |
Description |
Price |
Buy |
| KHX1333C7D3K2/2G |
2GB 1333MHz DDR3 Non-ECC CL7 DIMM (Kit of 2) |
$83 |
BUY NOW |
| KHX1333C7D3K2/4G |
4GB 1333MHz DDR3 Non-ECC CL7 DIMM (Kit of 2) |
$145 |
BUY NOW |
| KHX1600C9D3K2/2G |
2GB 1600MHz DDR3 Non-ECC CL9 DIMM (Kit of 2) |
$85 |
BUY NOW |
| KHX1600C9D3K2/4G |
4GB 1600MHz DDR3 Non-ECC CL9 DIMM (Kit of 2) |
$145 |
BUY NOW |
| Notice : |
| All Kingston products are tested to meet our published specifications. Not all systems or motherboard configurations will operate at these published specifications. Optimal settings will require the user to manually set the memory bus speed as well as CAS Latency, RAS to CAS, Row Precharge, Row Active Delay and possibly the Command Rate and voltage settings. These changes may also require overclocking the CPUs Front Side Bus. *Note - Overclocking the CPU or Memory Bus may result in damaging to computer components. Optimal settings for individual configurations may be less than published HyperX module speeds and timings. Kingston does not recommend that any user attempt to run their computers faster than the OEM published specifications. |
| System Memory Configuration |
| Standard Memory |
0MB (Removable)
|
| Maximum Memory |
24GB
|
| Expansion |
6 Sockets (2 banks of 3)
|
| Processor / Chipset |
Intel Core i7
Intel X58
Intel Core i7 Extreme Edition
Intel X58
|
| Bus Architecture |
PCI; PCI Express; SSD - SATA 2.5-inch; USB |
| Mfg's System P/N(s) |
N/A |
| Technical Notes |
| MODULES MUST BE ORDERED AND INSTALLED IN GROUPS OF THREE for Triple Channel mode. Kingston offers "K3" kit part numbers for Triple Channel mode.
MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode. Kingston offers "K2" kit part numbers for Dual Channel mode.
If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). A 64-bit Operating System is required to utilize more than 4GB of memory.
Per ASUS, Intel XMP and DDR3-1600 or higher speed is supported in one DIMM per channel only. |
